Seachem Acid Buffer
Seachem
Shipping & Returns
All goods are shipped using NZPost or Post Haste services with signature required option by default.
We cannot guarantee the overnight services, this is a service that we pay for; but is not guaranteed.
We do not offer refunds for change of mind, any returns needs to be organised with our team first prior to sending back.
If shipments are delayed by the carrier, we may not offer any reimbursement, New Zealand Post (NZPost) should be contacted directly.
Above are key points of our policy, Click Here to read our full shipping policy.
FREE Delivery & Rural Charges Policy
The minimum spend for free delivery on dry goods cannot be combined with frozen goods.
Where you have not met the minimum spend for free delivery, our team may contact you for freight payment.
Rural (RD) addresses require additional charges. To avoid delays if your address is rural, please select the Rural shipping option.
Above are key points of our policy, Click Here to read our full shipping policy.
Seachem Acid Buffer
Acid Buffer™ is a non–phosphate buffer to lower pH and buffer with Alkaline Buffer™. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer™ lowers pH and buffers between 6.0 and 8.0 when used with Alkaline Buffer™. As Acid Buffer™ lowers pH it converts carbonate alkalinity (KH) into available CO2.
Directions
To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters. For precise dosing, use the Seachem Digital Spoon Scale.
In order to adjust pH gradually, or if water is soft or not well buffered, use Acid Buffer™ with Alkaline Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart.
HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.
This chart is based on use in RO or RO/DI water and ratios may need to be adjusted for use in tap water.
| Acid Buffer | Alkaline Buffer | pH |
|---|---|---|
| 1 | 1.3 | 6.5 |
| 1 | 2.0 | 7.0 |
| 1 | 2.5 | 7.5 |
| 1 | 4.0 | 8.0 |
CAUTION: Causes serious eye irritation. Keep out of reach of children. Avoid contact with skin.
